GridGain 8.8.36 Release Notes
GridGain 8.8.36 brings stability improvements for GridGain.
Improvements and Fixed Issues
Community Edition Changes
| Issue ID | Category | Description |
|---|---|---|
GG-37941 |
Cluster Storage Engine |
Fixed an AssertionError that happened when calling cache.get inside transactions that contained CacheEntryProcessor with remove operations. |
GG-37933 |
Cluster Affinity and Baseline Topology |
Added a system property IGNITE_MIN_AFFINITY_HISTORY_SIZE to set minimum size for affinity assignment history. |
GG-37871 |
Cluster Storage Engine |
Optimized consumption of memory heap while expiring cache entries. |
GG-37870 |
Cluster Storage Engine |
Added a new method IgniteCache.localEntrySize() that allows to get entry size in bytes. |
GG-37844 |
Platforms & Thin Clients |
ODBC connector: Fixed a memory leak caused by improperly handled disconnects. |
Enterprise Edition Changes
| Issue ID | Category | Description |
|---|---|---|
GG-37668 |
General |
Kafka connector fat jar is now distributed through Maven. |
Control Center Agent Changes
| Issue ID | Category | Description |
|---|---|---|
GG-37729 |
Control Center Agent |
Added support for retrieving binary type metadata. |
Installation and Upgrade Information
See the Rolling Upgrades page for information about how to perform automated upgrades and for details about version compatibility.
Older GridGain Versions Compatibility
Below is a list of versions that are compatible with the current version. You can rolling-upgrade from any of those. Compatibility with other versions is not guaranteed. If you are on a version that is not listed, contact GridGain for information on upgrade options.
8.7.22, 8.7.28, 8.7.29-p1, 8.7.32, 8.7.34, 8.7.38, 8.7.42-p2, 8.8.1, 8.8.2, 8.8.2-p1, 8.8.3, 8.8.4, 8.8.4-p2, 8.8.5, 8.8.6, 8.8.7, 8.8.8, 8.8.8-p1, 8.8.9, 8.8.9-p1, 8.8.10, 8.8.11, 8.8.12, 8.8.13, 8.8.13-p2, 8.8.14, 8.8.15, 8.8.16, 8.8.16-p2, 8.8.17, 8.8.18, 8.8.18-p1, 8.8.19, 8.8.19-p1, 8.8.20, 8.8.21, 8.8.22, 8.8.22-p1, 8.8.23, 8.8.23-p3, 8.8.24, 8.8.25, 8.8.25-p1, 8.8.26, 8.8.27, 8.8.28, 8.8.29, 8.8.30, 8.8.31, 8.8.32, 8.8.33, 8.8.34, 8.8.35
Apache Ignite Versions Compatibility
Below is a list of versions that are tested for basic compatibility with the current version. If you are on a version that is not listed, contact GridGain for information on upgrade options.
2.11.1, 2.12.0, 2.13.0, 2.14.0
Known Limitations
Jetty Configuration Incompatibility in GridGain 8.7.21 and Later
If you are upgrading from version 8.7.20 or earlier, consider an incompatibility issue related to Jetty configuration introduced in GridGain 8.7.21.
Your setup may be affected if:
-
You use the
ignite-rest-httpmodule (e.g. to connect to GridGain Web Console) -
You have a custom Jetty configuration that enables SSL for REST
-
Your Jetty configuration uses the
org.eclipse.jetty.util.ssl.SslContextFactoryclass -
The keystore specified in the Jetty configuration contains both the CA certificate and the private certificate
In this case, after starting a new version, an exception is thrown with an error message similar to the following:
java.lang.IllegalStateException: KeyStores with multiple certificates are not supported on the base class
org.eclipse.jetty.util.ssl.SslContextFactory. (Use org.eclipse.jetty.util.ssl.SslContextFactory$Server
or org.eclipse.jetty.util.ssl.SslContextFactory$Client instead)To workaround this issue, alter the Jetty configuration to use org.eclipse.jetty.util.ssl.SslContextFactory$Server or org.eclipse.jetty.util.ssl.SslContextFactory$Client.
See the configuration example at the Client Certificate Authentication page.
Default rebalanceThreadPoolSize in GridGain 8.7.26 and Later
In GridGain 8.7.26, the default value of the property IgniteConfiguration.rebalanceThreadPoolSize changed from 1 to min(4, number of CPU / 4).
It may cause a compatibility issue under the following conditions:
-
When a Rolling Upgrade is performed
-
The upgrade is performed from 8.5.7 version (or earlier) to 8.5.x or from 8.7.3 (or earlier) to 8.7.x
-
The server nodes have at least 8 CPU cores
-
The nodes configuration does not have the property
IgniteConfiguration.rebalanceThreadPoolSize, so the default value is used
In this case, an exception is thrown with an error message similar to the following:
сlass org.apache.ignite.IgniteException: Rebalance configuration mismatch (fix configuration or set -DIGNITE_SKIP_CONFIGURATION_CONSISTENCY_CHECK=true system property).
Different values of such parameter may lead to rebalance process instability and hanging. [rmtNodeId=5fc58fb7-209d-489a-8034-0127a81abed6, locRebalanceThreadPoolSize = 4, rmtRebalanceThreadPoolSize = 1]To workaround this issue, change the configuration of the server nodes to rebalanceThreadPoolSize=1 so that it matches
the previous default configuration. For example:
<bean class="org.apache.ignite.configuration.IgniteConfiguration">
<property name="rebalanceThreadPoolSize" value="1"/>
<!-- The rest of the configuration goes here -->
</bean>Jetty Doesn’t Accept Incorrect Configuration in GridGain 8.7.31 and Later
In GridGain 8.7.31 Jetty was upgraded to 9.4.33. Starting that version, Jetty has more strict validation of the provided configuration files. Before that version, an incorrectly spelled property in the configuration file had no effect. Starting this version, errors in the configuration will lead to an error on start.
Your setup may be affected if:
-
You use the
ignite-rest-httpmodule (e.g. to connect to GridGain Web Console) -
You have a custom Jetty configuration for REST
-
The custom configuration has errors in it
You will need to fix the custom Jetty configuration before upgrading.
ignite.sh No Longer Enables Remote JMX by Default in GridGain 8.7.31 and Later
Starting from 8.7.31 version, GridGain no longer attempts to automatically enable the remote JMX. Default settings are known to cause issues if customized (for example, secure the connection). Also, in most cases, remote JMX is not required since many tools use local JMX connections (not using TCP).
Your setup may be affected if:
-
You start GridGain nodes via
ignite.shscript -
You connect to GridGain nodes' JMX interface remotely over TCP using the default configuration
To continue using remote JMX, you need to manually specify the required JMX settings. Please see the example below. Note that you don’t need remote JMX if you use a local connection, such as connecting JConsole to a GridGain process on the same host.
export JVM_OPTS="-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=33333 \
-Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false"
bin/ignite.sh.NET: GridGain Nuget Package Misses GridGain.Ignite Jars in 8.8.17 and Later
Add the GridGain.Ignite dependency to your project, so that jars from it are included.
.NET: Docker Images Need Additional Configuration
To run .NET SDK commands, install the .NET SDK. For more details, click here.
We Value Your Feedback
Your comments and suggestions are always welcome. You can reach us here: https://gridgain.freshdesk.com/support/login or docs@gridgain.com
Please visit the documentation for more information.
© 2024 GridGain Systems, Inc. All Rights Reserved. Privacy Policy | Legal Notices. GridGain® is a registered trademark of GridGain Systems, Inc.
Apache, Apache Ignite, the Apache feather and the Apache Ignite logo are either registered trademarks or trademarks of The Apache Software Foundation.